How to Change T16D/T12D Stick Mode?
How to Change T16D/T12D Stick Mode?
Take T12D as an example.
The stick mode is mode 2 now, with throttle on the left joystick.
Prepare screwdrivers.
Use the screwdriver to remove the four screws on the two buckets, and remove the back cover.
(The two buckets are used to fix the joysticks)
Unplug the two connectors.
Then we just need to exchange the left stick and the right stick.
Remove the four screws here with the screwdriver. Removed.
Unplug the two connectors.
Exchange the left stick and the right stick. Remember to reverse the direction of the stick.
Put the two sticks in place.
After that, connect the two connectors.
Put back the buckets and tighten the screws.
Check if the two joysticks work well. It is mode 1 now, with throttle on the right stick.
Install the back cover. Remember to connect the two connectors.
After the modification of the joystick, we need to calibrate the joysticks of the transmitter.
Note: The joystick calibration methods are the same for T12D and T16D transmitter.
For more details of T16D, please refer to the link:
https://www.radiolink.com/t16d
For more details of T12D, please refer to the link:
https://www.radiolink.com/t12d
If any question about RadioLink products please feel free to contact us. Our email is: [email protected]
#transmitter #radiolink
Watch video How to Change T16D/T12D Stick Mode? online without registration, duration hours minute second in high quality. This video was added by user RadioLink 19 August 2024, don't forget to share it with your friends and acquaintances, it has been viewed on our site 292 once and liked it 4 people.