DIY fence foundation

Опубликовано: 11 Ноябрь 2020
на канале: Practice makes perfect
2,991
57

I'll show you how to make a foundation for a fence with your own hands. The procedure for constructing a foundation for a corrugated fence is as follows:
First you need to mark the location of the future fence foundation using two cords and pegs.
Digging holes for supports and foundation strip. The depth of the strip foundation, in my case, is 30 centimeters, the width is 20 centimeters. The supports go 1 meter into the ground.
The supports are installed on spacers and leveled.
The fence supports are filled with concrete to the level of the foundation pit. Then you need to wait for the concrete to completely harden and continue working.
The formwork is laid in the tape. The reinforcement cage is laid in such a way that it does not reach 2-3 cm from the edges of the foundation on all sides. This will avoid metal corrosion. Concrete is poured in layers of 15 centimeters and joined with reinforcement or worked with a deep vibrator to expel all air bubbles from it. After 12 hours, the concrete is moistened and covered with film. Thus, you should wait for the concrete to gain strength in accordance with its brand, periodically watering the concrete with water to prevent cracking.
After 7 days, it is necessary to remove the formwork and continue installing the corrugated fence.
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Video sections (Chapters):
0:00 Introduction
0:35 Dismantling the old fence
1:20 Dismantling old support pillars
1:55 Marking for the fence foundation
2:36 Digging a ditch for the foundation
3:05 Drilling wells for fence support posts
4:24 Concreting support pillars
6:26 Reinforcing the foundation with reinforcement
9:13 Installation of formwork for the fence foundation
10:53 Pouring the foundation of the fence with concrete mortar
12:57 Treating support pillars with an anti-corrosion compound
13:14 Dismantling the foundation formwork
14:55 Ready foundation for the fence
15:13 Conclusion
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
And in this video I will show you how to make a Gate with your own hands
   • Metal gates with their own hands  
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Subscribe to our channel and watch videos on this topic #fence, #foundation, #foundationforfence, #profiledecking.
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Our social media channel following the links:
Facebook -   / 1147375328749226  
Instagram - https://www.instagram.com/delo__maste...
Telegram - t.me/delo_mastera_boitsa
Odnoklassniki - https://ok.ru/delomasteraboitsa
VKontakte - https://vk.com/club141674316
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Become a channel sponsor and you will get access to exclusive bonuses. More details:
   / @delo_mastera_boitsa  
Thank you very much for your support friends 💕


Смотрите видео DIY fence foundation онлайн без регистрации, длительностью часов минут секунд в хорошем качестве. Это видео добавил пользователь Practice makes perfect 11 Ноябрь 2020, не забудьте поделиться им ссылкой с друзьями и знакомыми, на нашем сайте его посмотрели 2,99 раз и оно понравилось 5 людям.