Wireguard VPN Server Installation/ Configuration/ Virtual Private Network User Management
Let’s install and configure out Wireguard instance now!
Now we can configure Wireguard.
Start by creating the needed folder and the private/public keys of the server:
The next screen will inform you that you need to set a static IP address. It’s best to set a static IP address in your router’s settings, as you are ensuring that DHCP does not try and give this address to any other devices. However, certain routers (mostly ISP provided ones) do not allow you to complete DHCP reservations. If you can’t set a static IP address for your Raspberry Pi in your router, set a static IP address on the Raspberry Pi by following the instructions. I specified a static IP address in my router so I am going to skip this step.
You will now need to select a local user. If you’ve created a different user (outside of the default pi user), you will have the option here.
You might be prompted to install the latest kernel update. If you are, select Yes to proceed. If it doesn’t, skip to the next step to proceed. NOTE: If you need to update the kernel, you will be required to restart this process after your Raspberry Pi reboots
You will be asked to enter the port you’d like to use (default is 51820). It’s probably best to keep it as the default, but if you have a reason to change it, you can do that here.
You now need to select the DNS provider you’d like to use. Select Custom if you’d like to use your own DNS server, or any of the public DNS providers if you don’t want to use a local DNS server.
You will now be prompted to use your public IP address or public DNS entry. If you have a static IP address, you are free to use this address. However, if you have a dynamic external IP address
You will now be prompted that the server keys will be generated. Select OK. The next step will tell you that the VPN Server will check for unattended-upgrades, and a periodic reboot will be required. This is a great option. Enable unattended-upgrades (unless you have a good reason not to) and proceed. The packages will now install.
The installation is now complete! Reboot your system.
https://www.querypanel.com/installati...
• How to setup openvpn server on ubuntu
Смотрите видео Wireguard VPN Server Installation/ Configuration/ Virtual Private Network User Management онлайн без регистрации, длительностью часов минут секунд в хорошем качестве. Это видео добавил пользователь CS BABA 09 Февраль 2024, не забудьте поделиться им ссылкой с друзьями и знакомыми, на нашем сайте его посмотрели 196 раз и оно понравилось 5 людям.