ATV 6V Beast 6v Kids Battery Electric Ride On Quad Bike Assembly Instructions

Опубликовано: 02 Ноябрь 2020
на канале: RiiRoo

78,511

140

Check out our ATV 6V Beast 6v Kids Battery Electric Ride On Quad Bike Assembly Instructions.

RESOURCES & LINKS:
____________________________________________
For more info on this car, visit - http://bit.ly/ATV6VBeastQuadBike
Check out the promotional video - • ATV Beast 6v Battery Electric Ride On...
Our ride-on cars - https://riiroo.com/collections/ride-o...
Our ride on motorbikes - https://riiroo.com/collections/electr...
Our ride-on scooters - https://riiroo.com/collections/riiroo...
____________________________________________

Here are the instructions:

1. Take a look at the parts list and ensure you have all the items to build.
2. Please refer to the parts list in the manual.
3. Protect & place the bike on a flat surface.
4. Disassemble the rear axle as shown.
5. Remove the cable tie from the motor.
6. Ensure that the wheel without the motor is placed on the same side as the groove on the axle.
7. Line up the motor with the axle.
8. For the rear wheels, ensure the assembly order of the hardware is as follows – wheel – trim – washer – & finally the nut.
9. Slide a washer onto the axle.
10. For the rear wheels, ensure the assembly order of the hardware is as follows – wheel – trim – washer – & finally the nut.
11. Attach the bush to the wheel.
12. Repeat the process on the other side.
13. For the front wheels, ensure the assembly order of the hardware is as follows – washer – wheel – trim – washer – & finally the nut.
14. Repeat the process on the other side.
15. Insert the steering rod & handlebar through the hole in the front of the bike.
16. Connect the handlebar wire to the multiplug protruding from the front of the bike.
17. Ensure the wire is threaded back through the hole once connected to prevent damage.
18. Line up the handlebar with the hole in the front of the bike.
19. Line up the steering rod hook with the hole on the steering rack.
20. Secure the steering rod with a washer & nut.
21. Attach the rear storage compartment to the relevant gaps on the back of the bike.
22. Secure it with screws.
23. Remove the seat battery cover.
24. Connect the battery terminal.
25. Refit the seat battery cover with screws.
26. Once battery terminals are connected check to see if the bike powers up.
27. Attach the front bumper to the relative gaps in the front of the bike.
28. Secure it with screws.

► If you need help choosing a ride-on toy for a present, then check us out @ https://riiroo.com/
►Subscribe: http://bit.ly/RiiRooSubscribe to see more videos on our ride-on toys.
►Find us on Facebook: / riirooltd

#miniquadbike #kidsquad #kidsquadbike

Смотрите видео ATV 6V Beast 6v Kids Battery Electric Ride On Quad Bike Assembly Instructions онлайн без регистрации, длительностью часов минут секунд в хорошем качестве. Это видео добавил пользователь RiiRoo 02 Ноябрь 2020, не забудьте поделиться им ссылкой с друзьями и знакомыми, на нашем сайте его посмотрели 78,511 раз и оно понравилось 140 людям.

528