Make an Autonomous "Follow Me" Cooler - Part 1
In this two part video series, we use an Arduino Uno to build an autonomous "follow me" cooler. The robot cooler connects to a smartphone via Bluetooth and uses GPS to navigate. All the electronics will be contained in the base so that other objects can be carried as well. In the first part, Davis explains how to build the base. In the second part, Aaron will work on the electronics.
See how we built it, including our materials and code on Hackster.io: https://www.hackster.io/hackershack/m...
Find all the 3D printable parts for this project on our Patreon: / follow-me-cooler-37733146
USEFUL LINKS:
Follow Hacker Shack on Instagram:
/ hackershackofficial
Subscribe to Hacker Shack: / @hackershack
MATERIALS:
1 x Cooler
20 x Small Wood Nails
1 x 1/4" Sheet MDF
1 x 8' 1x3
1 x 8' 1x2
6 x 1" #6 Wood Screws
2 x M5 Nuts, Bolts, and Washers
6 x #10 Nuts, Bolts, and Washers
8 x 1" #4 Nuts and Bolts
4 x M3 Nuts and Bolts
2 x 4mm Shaft Hub (http://www.robotshop.com/en/pololu-un...)
2 x Lawn Mower Wheels (http://www.harborfreight.com/6-inch-s...)
2 x Swivel Caster (http://www.harborfreight.com/3-inch-x...)
2 x Geared Motors (https://www.amazon.com/Magnolian-120R...)
MUSIC:
1st Song - Jordyn Edmonds: / jordynedmonds
2nd Song - David Cutter: / dcuttermusic
Смотрите видео Make an Autonomous "Follow Me" Cooler - Part 1 онлайн без регистрации, длительностью часов минут секунд в хорошем качестве. Это видео добавил пользователь Hacker Shack 13 Апрель 2017, не забудьте поделиться им ссылкой с друзьями и знакомыми, на нашем сайте его посмотрели 116,058 раз и оно понравилось 1.4 тысяч людям.