Set Up Your Own Wireguard VPN Server on Ubuntu 22.04
In this video, we have an exciting tutorial where we'll be setting up WireGuard VPN on Ubuntu 22.04, step by step. WireGuard is a modern, fast, and secure VPN protocol. Setting it up on Ubuntu is relatively straightforward, and I'll guide you through the process.
Get Kamatera VPS (30 days free trial)
https://zacs-tech.com/go/kamatera-vps/
Get RedHosting VPS
https://zacs-tech.com/go/rosehosting/
Get InterServer VPS
https://zacs-tech.com/go/interserver/
Get Hawk Host VPS
https://zacs-tech.com/go/hawkhost/
Register domain name
https://tinyurl.com/y8hz9seu
Commands
sudo nano /etc/sysctl.conf
sudo sysctl -p
sudo apt install wireguard
wg genkey | sudo tee /etc/wireguard/server_private.key | wg pubkey | sudo tee /etc/wireguard/server_public.key
sudo nano /etc/wireguard/wg0.conf
----------------------------------------------------------------------------------
[Interface]
Private IP address for the wg0 interface ##
Address = 10.0.0.1/24
VPN server listening port ##
ListenPort = 51820
VPN server private key ##
PrivateKey = ncjecndiuvndeivenokdmcdpo0dockecok
Firewall rules ##
PostUp = iptables -A FORWARD -i wg0 -j ACCEPT; iptables -t nat -A POSTROUTING -o enp1s0 -j MASQUERADE
PostDown = iptables -D FORWARD -i wg0 -j ACCEPT; iptables -t nat -D POSTROUTING -o enp1s0 -j MASQUERAD
-------------------------------------------------------------------------------------------------------------
ip -o -4 route show to default | awk '{print $5}'
sudo chmod -R 600 /etc/wireguard/
sudo systemctl enable wg-quick@wg0
sudo systemctl start wg-quick@wg0
sudo systemctl status [email protected]
wg genkey | sudo tee /etc/wireguard/client_private.key | wg pubkey | sudo tee /etc/wireguard/client_public.key
sudo nano /etc/wireguard/wg0.conf
-----------------------------------------------------------------------------------------------------------------------
[Interface]
VPN client private IP address ##
Address = 10.0.0.2/24
VPN client private key ##
PrivateKey = 0COkq1GMM86CmlF5blPFDYhU84iTX8iJ7lWoC1gLfnk=
[Peer]
VPN server public key ##
PublicKey = Znnnnnmjiio
VPN server public IP address and port ##
Endpoint = 192.168.122.101:51820
Route all the traffic through the VPN tunnel ##
AllowedIPs = 0.0.0.0/0
Key connection alive ##
PersistentKeepalive = 15
------------------------------------------------------------------------------------------------------------
[Peer]
Client public key ##
PublicKey = 6mmmmmmm
Client IP address ##
AllowedIPs = 10.0.0.2/24
-------------------------------------------------------------------------------------------------------
sudo systemctl restart [email protected]
sudo systemctl start wg-quick@wg0
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for your support!
Смотрите видео Set Up Your Own Wireguard VPN Server on Ubuntu 22.04 онлайн без регистрации, длительностью часов минут секунд в хорошем качестве. Это видео добавил пользователь ZacsTech 12 Ноябрь 2023, не забудьте поделиться им ссылкой с друзьями и знакомыми, на нашем сайте его посмотрели 22,953 раз и оно понравилось 184 людям.