SRAM MTB Brakes | How to: Replace 6-bolt Brake Rotors
How to: Replace 6-bolt Brake Rotors
1. Use a digital caliper and gloves.
If the measurement is above the minimum recommended thickness, the rotor is safe for use.
If the measurement is below the minimum recommended thickness, it’s time to replace them.
2. Remove the wheel from the bicycle according to the wheel manufacturer's instructions.
3. Use a T25 Torx wrench. Remove the six T25 bolts.
4. Remove the rotor from the hub.
5. And place it on a clean surface.
6. Install the new rotor on the hub, and hand thread the six new T25 bolts into the hub.
7 .Use a T25 Torx wrench. Hand tighten the bolts in a star pattern.
8. Use a Torque wrench and T25 Bit. Tighten the bolts to 6.2 NM in a star pattern.
9. Install the wheel according to the wheel manufacturer’s instructions.
Subscribe to the SRAM channel → / @sram
Смотрите видео SRAM MTB Brakes | How to: Replace 6-bolt Brake Rotors онлайн без регистрации, длительностью часов минут секунд в хорошем качестве. Это видео добавил пользователь SRAM 25 Июль 2024, не забудьте поделиться им ссылкой с друзьями и знакомыми, на нашем сайте его посмотрели 83 раз и оно понравилось 2 людям.