TIG Welding Basics: Lap Joints
Welding Helmet Shade Selection Chart: https://www.weld.com/blog/tig-welding...
Gas Tungsten Arc Welding (GTAW) or TIG welding, can be very difficult for new welders to master, especially without formal training. Today we are going to discuss and demonstrate some proper techniques and drop a few tips to help even the most novice of welders master the lap joint.
As with any welding process we get into, the first thing we need to discuss is the proper protective equipment for the application at hand. Although TIG welding doesn’t generate any sparks, we still want to wear a welding jacket to block out the UV rays produced by the intense arc emitted from the TIG torch. All exposed skin should be covered regardless of what welding process we intend to use and TIG is no exception. Next, we want to make sure our hands are protected. A good pair of dry leather gloves are my first choice, you want to make sure they fit really well and are appropriate for TIG welding. A big pair of bulky gloves made for Stick welding would be a poor choice as they will not dive you good dexterity to control the filler metal. Gloves made with synthetic fibers like polyester should not be worn as they will not protect the wearer from the heat resulting from the welding process. Synthetic fibers also melt when they come in contact with heat and that’s not something you want to happen while you have them on your hands. A welding cap is also recommended especially for those with thinner hair or the absence of it. Safety glasses are a must and go without saying, but I will say it anyway. Polycarbonate safety glasses should be worn any time you are in a shop or work environment. They will help block UV glare and are also impact resistant. Safety glasses should be compliant with ANSI Z87.1. A quality welding hood goes without saying but something that is rarely discussed is the appropriate shade lens for the task at hand. For the purpose of the welding we are doing today, I will be using a shade 9 as that is what is comfortable for me. For additional shade recommendations, I strongly encourage you to check out the ANSI Z49.1 Safety in Welding, Cutting and Allied Processes which is available free for download on the internet.Screen Shot 2019-09-16 at 12.56.59 PM
Now that you are familiar with the safety requirements, let’s get into the actual welding portion of this article. For this demonstration, we are going to perform a fillet weld on a lap joint using some 1/8” thick steel coupons. We are using the ESAB Rebel 205 AC/DC, since were running steel we will set the machine on DC- at 130Amps. We need roughly 1 amp for every thousandths of material thickness and 1/8 material is .125 amps. I like to add 5 additional amps just in case I need a slight bump. I will be using a 1/16” ER70S-6 Filler rod and a 3/32” E3 tungsten with a 30° grind angle. I want to keep my weld right around the 1/8 size so the 1/16” filler will give me just that. Remember the weld will be roughly 1 and 1/2 times the diameter of the filler wire. As with most TIG welding we will be running 100% argon and because I am using a gas lens I will run about 20CFH. If you are using a standard collet body you can set your flow around 15CFH or so.
Before we get into welding with filler wire, we need to understand how to manipulate and read the puddle. The best way to do this is to run a couple autogenous welds (fusion) first. Once we get the hang of welding without filler and fusing the materials together we can then add filler.
VISIT OUR WEBSITE: https://www.weld.com
FOLLOW US ON INSTAGRAM: / welddotcom
JOIN THE FACEBOOK GROUP - / welddotcom
Talk with Bob, Jason and Mancub!
------------------------------------------------
EQUIPMENT WE LIKE AND USE IN THE SHOP:
WEILER ABRASIVES: http://weilercorp.com
SELECT ARC WIRE: http://www.select-arc.com
PFERD ABRASIVES: http://www.pferdusa.com
ESAB POWER SOURCES: http://www.ESAB.com
EVERLAST POWER SOURCES: http://www.everlastgenerators.com
AHP POWER SOURCES: http://www.ahp.com
TAB AND SLOT WELDING TABLES: http://www.tabandslot.com
VIDEO SCHEDULE:
MONDAY @ 5:30 PM ET
WEDNESDAY @ 5:30 PM ET
FRIDAY @ 5:30 PM ET
Weld.com is a dedicated to helping you build your career as a welder / fabricator. Whether you’re a hobbyist, student or active in the trade; we are here to help further your craft. If you want to keep learning and interacting with us, make sure you hit that subscribe and notify (bell) button. Join us in the comment section after each video. If you have questions on projects or tests you’re doing now, head over to the Facebook group so you can share pictures with us and get feedback from the community.
FACEBOOK GROUP - / welddotcom
#welddotcom
Disclaimer: Weld.com is compensated for providing links in our descriptions. However, we only work with companies that we use ourselves and can honestly and ethically recommend to our audience.
Смотрите видео TIG Welding Basics: Lap Joints онлайн без регистрации, длительностью часов минут секунд в хорошем качестве. Это видео добавил пользователь Weld.com 16 Сентябрь 2019, не забудьте поделиться им ссылкой с друзьями и знакомыми, на нашем сайте его посмотрели 123,68 раз и оно понравилось 3.1 тысяч людям.