Acceleration Due To Gravity
Check us out at http://physics.tutorvista.com/motion/...
Acceleration Due to Gravity
Our equipment consists of small metal ball, which is our free falling object. This ball is held in a clamp which is released
by a thumscrew. Initially the ball is held in the clamp and completes an electrical circuit which is connected to an electronic
timer. When the thumbscrew is released, the clamp springs open, releasing the ball and opening the circuit, causing the timer
to start. A metal pad is placed directly under the ball and when the ball strikes this pad, the timer stops and the elapsed time
is read. The clamp which initially holds the ball can be adjusted to varying heights above the metal pad on the floor. For this
experiment we positioned the clamp at 7 different heights and released the ball 5 times for each height, recording the elapsed
times. The height of free fall was measured with a meter stick from the bottom of the clamped ball to the metal pad with an
accuracy of 0.5mm.
During the course of the experiment, we noticed several problems with the equipment that could result in systematic errors.
First of all, the release contact was not very reliable, causing the timer to begin slightly before ball entered free fall. This
would result in longer elapsed times and therefore, smaller values for g. Secondly, the contact plate on the detection pad was
not parallel to the floor. The consequence of this is a random deviation of the elapsed time, depending on how high above
the floor the ball made contact with the plate. We were able to minimize the effect of the timer starting early by placing a
stiffer spring in the clamp and throwing out elapsed times which deviated by more than 0.2s from the average. This does not
completely eliminate the problem but does throw out the trials which clearly had problems during release. The second effect
was minimized by carefully sighting vertically from the clamp to the plate and making sure that the location of the plate was
consistent from trial to trial. A consistent release was obtained by holding the clamp steady with both hands whicle releasing
the thumbscrew. This minimized the horizontal velocity of the ball and resulted in a more consistent position of the ball on
the metal pad.
Please like our facebook page
/ tutorvista Follow us at: https://plus.google.com/+tutorvista/
Watch video Acceleration Due To Gravity online without registration, duration hours minute second in high quality. This video was added by user Educational Videos 26 April 2010, don't forget to share it with your friends and acquaintances, it has been viewed on our site 74,443 once and liked it 444 people.