How to use Miracle Box to flash Mediatek firmware (.bin format)
Download links & Text format @
This video explains how to flash firmware in .bin format to a Mediatek device using Miracle Box
Drop a comment below if you have questions or reach out to us on the following platforms:
Website:
Facebook:
Twitter:
Google+ :
00:22
In this video tutorial, I'll be explaining how to flash the firmware to a Mediatek Android phone
00:29
using Miracle Box. The things you'll need for this guide are your firmware for the phone mode you wish to flash
00:40
in the .bin format. You'll need Miracle Box too and your Mediatek VCOM drivers. Drivers are to ensure that
00:51
your PC can communicate with the phone effectively for flashing to occur. First, install Mediatek VCOM drivers
01:00
We already have several guides on that at the Forum & Youtube channel. I'll briefly take you through that
01:09
so you have a clear idea of how the whole thing is supposed to work. You launch device manager
01:19
by pressing the Windows button. I'm using a Windows 10 PC, that means I first had to disable my signature
01:30
verification. If you're using a Windows 8 or 10 PC, you need to disable your drivers signature verification
01:37
so you can install unsigned drivers because this Meditek VCOM driver is an unsigned driver.
01:43
so ensure you see our video and guide on how to disable signature verification on a Widows 8 & 10 PC
01:51
With my signature verification disabled, launch device manager (as I've done). Select any item on the list
02:05
click on Action - Add Legacy Hardware - Next - Install the hardware... - Next - Next - Have Disk...
02:22
Browse - Navigate to the directory where you have your VCOM drivers - Drivers - USB VCOM. You need to know
02:45
your PC's architecture (32 or 64 bit). As you can see on the list, we have just Windows 7 as the latest
02:53
If you're using a Windows 7,8 or 10 PC, you're to select the Windows 7 folder. To check if yours is 32 or 64 bit
03:02
Go to My Computer (or This PC) - Right-click Properties - Mine is 64 bit so I select the one for 64 bit
03:30
then I click on Open - OK - Next - Next. It says the following hardware was installed... with Code 10 error
04:08
its nothing to worry about. The reason you're getting that error is because you've installed an unsigned driver
04:13
you might have these yellow triangles here, nothing to worry about. At this point, I've installed VCOM drivers
04:31
Launch Miracle box and wait for it to launch to the dashboard. Click on MTK since we're flashing Mediatek
05:03
Tick Write. From this place, you have to select the chipset for your phone model. Mine is MT6580
05:18
phone so I'll just select this (4th boot). Click this folder icon so you can select the firmware you wish to
05:30
flash (which is in .bin format) and click on Open. At this point, you click the Start button
05:46
Waiting for USB Port. Switch off the phone, with a charged battery in, connect to the PC via USB cord
06:02
You need to hold on for flashing to begin..OK, it has recognized the phone and its going to start flashing
06:12
It could take a while, ensure not to interrupt the flashing process. Wait till it gets to 100% then close
06:37
and disconnect and boot up the phone. If the phone is stuck at a bootloop or boot animation / logo
06:48
just boot into recovery mode and do a factory reset then bootup the phone. That's basically how to flash
06:54
a Mediatek Android phone's firmware using Miracle box --------------------------
Hire Or Consult Us
Join Our Training
Watch video How to use Miracle Box to flash Mediatek firmware (.bin format) online without registration, duration 07 minute 06 second in high hd quality. This video was added by user Hovatek 07 July 2016, don't forget to share it with your friends and acquaintances, it has been viewed on our site 204 thousand once and liked it 69 people.