VW Golf MK7 (5G) RVC High retrofit, part 2: wiring camera
Installation of the camera wiring kit for VW MQB cars (Golf MK7 and Passat B8) that I got from AliExpress for around $20. Check out the process of removing interior trim, replacing standard trunk handle with upgraded one (with camera and mechanism), guiding wires though the vehicle, connecting CAN-BUS and video feed to infotainment main unit, adding new power circuit to the cabin fuse box, and more.
ℹ️ This tutorial does not contain coding, adaptation, parameterization, basic settings, nor calibration of the camera. Next steps will be covered in part 3 of the tutorial.
🚗 This tutorial was made in 2015 Volkswagen Golf MK7 with MIB2 Discover Media infotainment system. Process of installation in VW Passat B8 (3G) should be very similar.
🔌 Wiring pinout (vehicle side)
Video signal feed - quadlock connector, blue connector, pin 6
Video signal shield - quadlock connector, blue connector, pin 12
CAN-BUS High signal - quadlock connector, grey connector, pin 6
CAN-BUS Low signal - quadlock connector, grey connector, pin 12
12V power - cabin fusebox, fuse 18, 7.5Amp
📺 RVC High retrofit, part 1: rear view camera test: • VW Golf MK7 (5G) RVC High retrofit, p...
📺 Prying tools: • Trim removal toolset for VW, Audi, Se...
📺 Main unit removal: • Removing CD-changer / headunit / SD d...
📺 VW Golf MK7 front cubby removal: • VW Golf MK7 (5G) undo front cubby (AU...
🛒 Buy RVC High wiring on AliExpress: http://ali4cars.com/s/?p=vw-mqb-rvc-h...
🛒 Ali4Cars: http://ali4cars.com/product/vw-mqb-rv...
🛒 Prying tools: http://ali4cars.com/product/interior-...
🛒 OBDeleven: http://mr-fix.info/redirect/obdeleven
0:00 Wiring kit for VW Golf MK7 RVC High
1:14 Trunk door trim removed
3:04 Replacing standard door handle
3:50 Installing camera mechanism
4:50 Guiding wires from trunk door to cars interior
6:42 Trunk release mechanism pinout
7:37 Connecting reverse camera to the wiring
8:53 Placing the harness in trunk door
9:45 Planning how to go though the vehicle
11:12 Disassembling interior trim
12:10 Guiding cable though trunk side
12:55 Going from trunk to the front
13:15 Disassembling dashboard
13:45 Sliding out the main unit
14:22 Getting CAN-BUS and video to quadlock connector
17:33 Check if everything works so far
18:35 Accessing center console and fusebox
21:25 How to add circuit to MQB fusebox
23:55 Adding circuit to fusebox with zip tie
26:10 Locking fuse box in place
27:00 Tips
27:17 Fuse 18 is 7.5 Amp
27:23 Removed elements before installing back in car
28:15 Coding and adaptation coming soon
✅ http://mr-fix.info/
✅ Facebook: /
✅ Instagram: /
✅ Patreon: / mrfixpl
Watch video VW Golf MK7 (5G) RVC High retrofit, part 2: wiring camera online without registration, duration hours minute second in high quality. This video was added by user mr-fix 02 July 2022, don't forget to share it with your friends and acquaintances, it has been viewed on our site 80,41 once and liked it 88 people.