PART DESIGN ASSIGNMENT IN SOLIDWORKS | PART 2
#MasteringtheRevolveCommandinSolidWorks
PART DESIGN ASSIGNMENT IN SOLIDWORKS | PART 2 #mastering #solidworks #solidworkstutorial #hindi
The Revolve command in SolidWorks is used to create a feature or a body by revolving a sketch around an axis. This is particularly useful for creating symmetrical parts such as shafts, cones, or any component with a circular cross-section. Here’s a step-by-step guide on how to use the Revolve command:
Creating a Revolve Feature in SolidWorks
Open or Start a New Part:
Open SolidWorks and create a new part document.
Create a Sketch:
Select a plane (e.g., the Front Plane) to create a new sketch.
Use the sketch tools to draw the profile that you want to revolve. Ensure the profile is closed if you are creating a solid feature.
Define an axis of revolution. This can be part of the sketch or an existing edge/line.
Exit the Sketch:
After completing the sketch, exit the sketch mode.
Activate the Revolve Command:
Go to the Features tab on the Command Manager and select the "Revolved Boss/Base" button.
Set Parameters for the Revolve:
SolidWorks will automatically select the sketch you just created.
Choose the axis of revolution. If you did not create an axis in the sketch, you could select a straight edge or a line to serve as the axis.
Set the revolve angle. You can specify a full revolution (360 degrees) or any other angle for partial revolutions.
You can also specify direction, which allows you to control the revolve direction (One-Direction, Two-Direction, Mid-Plane).
Complete the Feature:
Click the green checkmark to complete the feature.
The 3D part will be generated based on the sketch revolved around the selected axis.
Example Scenario
Suppose you want to create a simple cylindrical part with a hole through the center:
Sketch the Profile:
Draw a rectangle that represents half of the cross-section of the cylinder. Ensure that one side of the rectangle lies on the axis of revolution.
Define the Axis:
The axis can be a centerline drawn in the sketch along the edge that touches the origin or a predefined line.
Revolve the Sketch:
Use the Revolved Boss/Base command, select the centerline as the axis of revolution, and specify 360 degrees for a full revolve.
Tips:
Ensure your sketch is fully defined to avoid errors during the revolve.
For more complex shapes, combine the Revolve feature with other features like Extrude, Cut, Fillet, etc.
Utilize symmetry in your sketches to simplify the revolve process.
By mastering the Revolve command, you can efficiently create complex symmetrical parts in SolidWorks.
For Queries-
[email protected]
#mechanical #mechanicalengineering #mechanicalpencil #mechanicalmod #mechanicalbull #mechanicalkeyboard #mechanicalengineer #mechanicalwatch #mechanicalanimals #mechanicalmods #mechanicaldummy #mechanicals #biomechanical #mechanicalkeyboards #mechanicalart #mechanicaldesign #mechanicalwatches #mechanicalmonday #mechanical_engineering #mechanicalm #biomechanicaltattoo #mechanicalengineers #mechanicalstudent #mechanicalpencils #mechanicalengineeringstudent #mechanicalpouch #mechanicalmodmechanicals #mechanicaldummymechanicalengineeringstudentmechanicsburg #mechanicaleducation #mechanicproblemsmechanicalengineering #mechanicgirlmechanicalmods #mechanicaltattoo #mechanicalbulltour #mechanicalpencildrawing #mechanicalheart #mechanicalbullriding #electromechanical #mechanicalanimal #mechanicalcontractor #mechanical_engineer #CATIA #SOLIDWORKS #CREO #ANSYSWORKBENCH #AUTOCAD
Watch video PART DESIGN ASSIGNMENT IN SOLIDWORKS | PART 2 online without registration, duration hours minute second in high quality. This video was added by user CAD CAM CAE Design Solutions 28 May 2024, don't forget to share it with your friends and acquaintances, it has been viewed on our site 101 once and liked it 2 people.