Voltage relay DigiTOP Vp-10AS (configuration and calibration)
The DigiTOP voltage relay is a device that is used for automatic voltage control in electrical networks. My voltage relay for the DigiTOP Vp-10AS socket. Setting up and calibrating the voltage relay is necessary the first time you turn it on. It ensures voltage stability and protects equipment from overvoltage, which can cause damage. Below are the steps to configure and calibrate the DigiTOP voltage relay:
Check that the mains voltage matches the operating range of the DigiTOP voltage relay. Depending on the model, the range can vary from 100 V to 500 V.
Connect the DigiTOP voltage relay to the network and equipment you want to protect from overvoltage.
Turn on the DigiTOP voltage relay by pressing the power button.
Determine the desired voltage level you want to set. This can be done using the buttons that are located on the front panel of the relay.
Set the desired voltage level. To do this, use the operating instructions that come with the DigiTOP voltage relay.
Calibrate the DigiTOP voltage relay. To do this, use the calibration procedure, which is also described in the operating instructions.
Test the operation of the DigiTOP voltage relay by applying a simulated overvoltage to the network. If everything is configured correctly, the relay should operate and disconnect the equipment from the network.
If necessary, repeat the setup and calibration of the DigiTOP voltage relay to ensure that it operates correctly and reliably.
It is important to remember that setting up and calibrating the DigiTOP voltage relay requires experience and knowledge in electrical engineering. If you are not confident in your skills, it is better to contact a specialist who will help you set up and calibrate the DigiTOP voltage relay.
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Video sections (chapters):
0:00 Introduction
0:32 Complete set of voltage relay DigiTOP Vp-10AS
0:59 Voltage relay calibration
4:07 Setting up the voltage relay
7:09 Checking the operation of the voltage relay
7:37 Conclusion
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
And in this video you will see what to do if the Freezer does not turn on (replacing the start relay) • Морозильная камера не включается (зам...
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Subscribe to our channel and watch a video on this topic #voltagerelays #digitop #relays.
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Our social media channel following the links:
Facebook - / 1147375328749226
Instagram - https://www.instagram.com/delo__maste...
Telegram - t.me/delo_mastera_boitsa
Odnoklassniki - https://ok.ru/delomasteraboitsa
VKontakte - https://vk.com/club141674316
▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰▰
Thank you very much for your support friends 💕
Watch video Voltage relay DigiTOP Vp-10AS (configuration and calibration) online without registration, duration hours minute second in high quality. This video was added by user Practice makes perfect 01 January 1970, don't forget to share it with your friends and acquaintances, it has been viewed on our site 3,11 once and liked it 7 people.