Home Machine Shop Tool Making - Machining A Set Of Vintage Style Rope Knurls
Machining A Set Of Vintage Style Rope Knurls, by Clickspring
In this video I make a set of classic rope knurling wheels, to put some ornamental rope knurl patterns on some of my future projects. There's plenty of lathe and mill work, as well as a bit of hand finishing with a fine cut file.
This is the main video in a series of 3, that will relate to the subject of creating these beautiful rope knurl patterns. The other 2 videos in this series are:
Spare Parts #5 - Making A Bump Style Knurling Tool Holder: • Spare Parts #5 - Making A Bump Style ...
Spare Parts #4 - Making, Hardening And Tempering A Form Tool For The Lathe: • Spare Parts #4 - Making, Hardening An...
Free plans for the double angled cutter, and form tool:
http://www.clickspringprojects.com/up...
http://www.clickspringprojects.com/up...
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: / clickspring
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras used in this video:
Panasonic GH5 - https://amzn.to/2rEzhh2
Panasonic X920 - https://amzn.to/2wzxxdT
Tools & Shop Products:
"Lathework: A Complete Course (Workshop Practice Series)" - https://amzn.to/2yBv4Rb
"Milling: A Complete Course (Workshop Practice Series)" - https://amzn.to/2K2QZ97
Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz): http://amzn.to/2HGPaJJ
"Hardening, Tempering and Heat Treatment (Workshop Practice Series)" - https://amzn.to/2KbZo6l
Kaowool 24" X 12" X 1" 2400 F Ceramic Fiber Insulation: http://amzn.to/2pfsM3d
Blue Matador Abrasive Paper - https://amzn.to/2IAFiBT
Abbreviated Transcript:
00:31 The rope pattern is formed by a knurling wheel that looks like this, that has a number of fine teeth around its perimeter. Now to form those teeth, I'm going to use an additional cutter that looks like this.
00:44 Each tooth on this cutter has a 90 degree V profile, and there are 4 teeth milled around a central axis. There's relief at the back of each tooth, and the cutting rake angle will be generated by milling past the tool centerline. I'll be using some of this EN8 steel to make both the cutter and the knurl.
02:43 After finding the edge of the work, I positioned this end mill, the correct distance past the centerline, and then set about milling the gaps between the teeth. For this part of the job I'm using the simple indexing plate of the dividing head, thats just behind the chuck.
03:32 For the cutter to work correctly, the back side of each tooth needs to be relieved, so I'll be removing this little corner of metal here on each tooth, and shaping it to blend with the back surface.
04:20 But I thought it might be worth showing what happens to the steel if nothing is done to protect it while its heated, so I've wrapped the working end of the cutter as usual, but I've left the chucking end uncoated, and exposed to the torch flame. With nothing to stop the oxidation, the unprotected end has formed a thick black scale, while the protected end is mostly free from scale, and looking quite bright.
05:39 Now you'll have noticed that the knurl teeth are cut on an angle to the body of the knurl, which means that the knurl blanks need to somehow be securely presented at an angle to the cutter. I could have simply cut them while they were still attached to the parent stock, but I figured since I was making a few of them, a dedicated holder would be bit more efficient, and I can keep it for when I make more in the future. So I made this arbor to hold them on the mill.
07:47 Back onto the mill, the work was again secured in the dividing head, and then tilted to an angle of 30 degrees. I took some time to cutter was carefully positioned against the work, to make sure it was centered on the blank, and then the teeth were cut into the knurl.
08:19 For this particular knurl I indexed for 40 teeth, which was simply one turn of the handwheel on the dividing head, for each cut.
08:56 With that first one complete, I used a few different angles, as well as index counts, to make the full set of 5 knurls, which will give me a good range of different rope knurl patterns. Each of those knurls was quench hardened and then tempered.
09:41 Bump style knurling tools generate an enormous side force on the work, so tailstock support definitely helps. And even with this support, the work still deflects quite a lot as the pattern is formed.
10:24 Now I didn't make any effort to calculate the correct diameter to avoid double tracking, in fact I was surprised to find that it wasn't really necessary.
References:
Frank Ford (Luthier/Machinist)
http://www.frets.com/HomeShopTech/Pro...
Machining A Set Of Vintage Style Rope Knurls, by Clickspring
Watch video Home Machine Shop Tool Making - Machining A Set Of Vintage Style Rope Knurls online without registration, duration hours minute second in high quality. This video was added by user Clickspring 20 September 2015, don't forget to share it with your friends and acquaintances, it has been viewed on our site 1,156,357 once and liked it 20 thousand people.