SolidCAM Automatic Edge Breaking
Watch the recording of our Mazak CV5-500, 5 Axis Vertical Machining Centre, in action HERE. Recorded during our "Live Cutting Seminar" on 25th April 2023, at our Technology Centre based in Barnsley.
This video's Focus: ⭐ 𝐒𝐎𝐋𝐈𝐃𝐂𝐀𝐌 𝐄𝐃𝐆𝐄 𝐁𝐑𝐄𝐀𝐊𝐈𝐍𝐆 ⭐
After machining a CAM part, a burr can sometimes be found that have straight edges or non-tangent outer surface topologies. This occurs when the tool chips the metal off the edge and it can ruin the functionality of the part, or endanger the user because it is razor sharp – removing it is the best option.
SolidCAM's Edge Breaking operation creates a deburring tool path on the outer edges of a part geometry. The position of the tool relative to the edge is always the bi-vector between the two surfaces of that edge.
✅ Enables creation of a fully automatic tool path by just selecting the part geometry
✅ Additional features include Automatic Feature Detection, Linking, Lead-In and Collision avoidance
✅ Ball mill cutters and quality geometry input (mesh) are required for the detection feature to work properly.
For further information, please contact SolidCAM UK on 01226 241744 or by email to [email protected].
Our website: www.solidcamuk.com.
#cncmachining #edgebreaking #milling #SolidCAM #deburring #5axismachining #5axis #cncprogramming #cadcam #SolidCAMUKTechCentre #SolidCAM @MazakEurope
Watch video SolidCAM Automatic Edge Breaking online without registration, duration hours minute second in high quality. This video was added by user SolidCAM UK Ltd 09 May 2023, don't forget to share it with your friends and acquaintances, it has been viewed on our site 56 once and liked it people.