ANCEL DS600 OBD2 Bi-directional Control Diagnostic Tool Professional ECU Coding DPF |ANCEL
ANCEL DS600+ Full System Car Diagnostic Scan Tool Automotive Scanner
ANCEL DS600: https://bit.ly/3C6FFiy ANCEL Official Store: https://anceltool.com/
How to know if it supports your car?
Leave comments below(the brand,model,release year of your car/truck,and also you can tell us what functions you want to do,so that we can help you confirmate that wether it can support your car or not,also can recommend you the most accurate product)
28+ Special Functions ECU Coding Bi-directional + 2 Year Free Update Online + Android 10.0 + Multi Languages Supported + 2GB RAM+32GB Storage
ANCEL DS600 Support 28+ Special Functions
1.Oil Reset
2.DPF Regeneration
DPF Regeneration is used to clear PM(Particulate Matter)from the DPF filter through continuous combustion oxidation mode(such us high temperature heating conbustion,fuel additive or catalyst reduce PM ignition conbustion)to stabilize the filter perfornance.
DPF regeneration may be performed in the following cases:
a)The exhaust back pressure sensor is replaced.
b)The PM trap is removed or replaced
c)The fuel additive nozzle is removed or replaced
d)The cataytic oxidizer is removed or replaced.
e)The DPF regeneration MIL is on and maintenance is performed.
f)The DPF regeneration control module is replaced.
3.AFS(headlamp) Reset
The feature is used to initialize the adaptive headlamp system.According to the ambient light intensity,the adaptive headlamp system may decide whether to automatically turn on the headlamps,and timely adjust the headlamp lighting angle while monitoring the vehicle speed and body posture.
4.EGR Adaption
This function is used to learn the EGR(Exhaust Gas Recirculation)valve after it is cleaned or replaced.
5.Brake-pad Reset
If the brake pad wears the brake pad sense line,the brake pad sense line sends a signal sense line to the on-board computer to replace the brake pad.After replacing the brake pad,you must reset the brake pad.Otherwise,the car alarms.
Reset must be performed in the following cases:
a)The brake pad and brake pad wear sensor are replaced.
b)The brake pad indicator lamp is on.
c)The brake pad sensor circuit is short,which is recovered.
d)The servo motor is replaced.
6.IMMO Service
7.Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory,and recover the automatic ascending and descending function of power window.
8.Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.
9.Steering Angle Reset
10.Injector Coding
Writing injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder so as to more accurately control or correct cylinder injection quantity.After the ECU or injector is replaced,injector code of each cylinder must be confirmed or re-coded so that cylinder can better indentify injectors to accurately control fuel injection.
11.Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.
12.Transport Mode
In order to reduce power consumption,the following functions may be disabled,including limiting the vehicle speed,not waking up the door opening network,and disabling the remote control key,etc.At this time,the transport mode needs to be deactivated to restore the vehicle to normal.
13.Battery Matching
14.Airbag Reset
15.Tyre Reset
This function is used to set the size parameters of the modified or replaced tire.
16.Cluster Reset
17.ABS Bleeding
18.Gear Learning
19.Language Change
20.Adblue Reset
After the diesel exhaust treatment fluid (car urea) is replaced or filled up,urea reset operation is required.
21.Elec. Throtle Adaption
22.Suspension Matching
23.A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.
24.Nox Sensor Reset
25.TPMS Reset
26.A/T Learning
This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox isdisassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impactproblem. In this case, this function needs to be done so that the gearbox can automatically compensateaccording to the driving conditions so as to achieve more comfortable and better shift quality.
27.Sunroof Initialization
28.Stop/Start Reset
✪ Buy obdii scanners on ANCEL, you will get Free shipping, 30 days return and refund, at least 1-year warranty, lifetime free tech support. ✪
Pinterest: / anceltool
Twitter: / anceltool
Facebook Group：https://www.facebook.com/login/?next=...
Any question ,you can send to [email protected]
#ancel#obdii scanner#vehicle#abs bleeding#cars#diagnostics
Watch video ANCEL DS600 OBD2 Bi-directional Control Diagnostic Tool Professional ECU Coding DPF |ANCEL online without registration, duration hours minute second in high quality. This video was added by user ANCEL 12 November 2021, don't forget to share it with your friends and acquaintances, it has been viewed on our site 1,412 once and liked it 7 people.