How to Configure Telnet On Cisco Router GNS3 By Vikas Singh
Hello friends
Today I am going to show you.
How to enable Telnet on Cisco router and switch?
I am using GNS3 for doing the demonstration.
Do the following
Open the GNS3 drag and drop the two routers.
Run the following commands.
R1#configure terminal
R1(config)#interface serial 0/0
R1(config-if)#ip address 192.168.1.1 255.255.255.0
R1(config-if)#no shutdown
R1(config-if)#exit
R1(config)#enable password vikas
R1(config)#line vty 0 4
R1(config-line)#login
R1(config-line)#password cisco
R1(config-line)#exit
R1(config)#exit
R1#copy running-config startup-config
R1#wr
R2(config)#interface serial 0/0
R2(config-if)#ip address 192.168.1.1 255.255.255.0
R2(config-if)#no shutdown
R2(config-if)#exit
R2(config)#exit
R2(config)#ping 192.168.1.1
R2(config)# telnet 192.168.1.1
Thank You
Vikas Singh
CMS Info System
[email protected]
[email protected]
Watch video How to Configure Telnet On Cisco Router GNS3 By Vikas Singh online without registration, duration hours minute second in high quality. This video was added by user Labs Hands On 19 March 2016, don't forget to share it with your friends and acquaintances, it has been viewed on our site 6,376 once and liked it 16 people.