Getting started with Logisim - A Basic Counter | Advanced Computer Organization.
NOTE:
Forgot to connect the power. Power should be connected to the very bottom on the left and is with ground in the menu.
Description: Using Logisim (link below), create a simple 8-bit counter (with ground and power connected) and the output connected to two hex displays, splitting the upper and lower nibble (4-bits). Hint: a bus splitter is required.
Logisim download | SourceForge.net (Links to an external site.)
https://sourceforge.net/projects/circ...
Steps: A) Drag a "counter", a "splitter", a "clock generator" and 2 Hex displays to the simulation area. B) Configure the counter to have 8 bits. C) Connect the output of the counter to the two hex displays, using the splitter. D) Connect the clock generator to the clock port of the counter.
Criterion: For a submission to be valid, when I open your submission (a *.circ file) and hit the clock generator, the two hex displays must start counting up: 00, 01, 02, 03...
More CPE 142. Advanced Computer Organization.:
• Advanced Computer Organization.
Watch video Getting started with Logisim - A Basic Counter | Advanced Computer Organization. online without registration, duration hours minute second in high quality. This video was added by user Computer Engineering life 04 September 2022, don't forget to share it with your friends and acquaintances, it has been viewed on our site 10,66 once and liked it 6 people.