How to Add Dahua/Cp Plus IP Camera in Hikvision NVR/DVR Using Hik-Partner Pro Application
Hikvision NVRs (Network Video Recorders) are quite versatile and allow the integration of IP cameras from different brands, including Dahua and CP Plus, using the Hik-Partner Pro application. Here is a step-by-step description on how to add non-Hikvision IP cameras to a Hikvision NVR using the Hik-Partner Pro app:
1. **Ensure Compatibility**: Make sure that the IP cameras from Dahua, CP Plus, or other brands support the ONVIF protocol, as this is essential for compatibility with Hikvision NVRs.
2. **Network Configuration**: Connect both the Hikvision NVR and the third-party IP cameras to the same local network. Assign IP addresses to the cameras that are within the same subnet as the NVR.
3. **Access the Hik-Partner Pro Application**:
Download and install the Hik-Partner Pro application on your device.
Log in to your Hik-Partner Pro account. If you do not have an account, you will need to register for one.
4. **Add the NVR to the Application**:
Go to the device management section in the Hik-Partner Pro app.
Select "Add Device" and choose "NVR".
Enter the NVR's IP address, username, and password. Follow the prompts to add the NVR to your device list.
5. **Configure the NVR for Third-Party Cameras**:
Access the NVR’s configuration menu via the Hik-Partner Pro app.
Navigate to the "Camera Management" section.
Select "Add" or "Manual Add" to begin adding a new camera.
6. **Add Third-Party IP Cameras**:
Choose the protocol type as "ONVIF".
Enter the IP address, port number, username, and password of the third-party IP camera.
Click "Add" or "Save" to complete the process.
7. **Check Camera Feed**: Once added, the NVR should start receiving the video feed from the third-party IP cameras. Ensure that the feed is visible and properly configured.
8. **Adjust Settings**:
Fine-tune the camera settings, such as resolution, frame rate, and recording schedules, to optimize performance.
9. **Troubleshooting**: If the camera feed does not appear, double-check the IP address, port number, and login credentials. Ensure the camera is ONVIF compliant and that there are no network issues.
By following these steps, you can successfully integrate Dahua, CP Plus, or other third-party IP cameras with a Hikvision NVR using the Hik-Partner Pro application, thereby expanding the versatility and functionality of your surveillance system.
Thank you for watching
Watch video How to Add Dahua/Cp Plus IP Camera in Hikvision NVR/DVR Using Hik-Partner Pro Application online without registration, duration hours minute second in high quality. This video was added by user CCTV ULMAN 23 June 2024, don't forget to share it with your friends and acquaintances, it has been viewed on our site 4,140 once and liked it 88 people.