How To Know When To Change The Bit During A Project, CNC Router
This CNC router tutorial video teaches you how to know when you need to change the bit in your CNC router during a project run. When you design a project that has more than one router bit, such as a v-bit and a down cutting endmill bit, you need to know what steps are needed and how the post-processor is set up to make sure the bit change takes place.
In this tutorial, we use the Longmill CNC router, gsender (g sender) control software and Vectric Vcarve, with an acrylic project with an LED lighted base, using an o flute bit and an engraving bit.
Please take the survey of how I am doing → https://bit.ly/3fLNmBY
Download PDF of all videos on this channel (sorted for the beginner) → https://bit.ly/3mLHGfI
---------------------------------------------
LONGMILL CNC ROUTER
Longmill CNC Router → https://sienci.com/product/longmill-m...
Longmill touch probe → https://sienci.com/product/touch-plat...
gSender control software → https://sienci.com/gsender/?ref=IDCWO...
---------------------------------------------
VECTRIC DESIGN SOFTWARE
Vectrc Vcarve Pro design software (recommended) → https://bit.ly/3d4WrEU
Vectrc Vcarve Desktop design software → https://bit.ly/3D4CwjH
------------------------------------------------------
CNC Insiders sign up (free files and more): https://idcwoodcraft.com/cnc-lp2-free...
---------------------------------------------
ITEMS DISCUSSED IN THIS VIDEO
Widget Works diamond engraving bit → SEE BELOW
1/8" 0-flute bit → SEE BELOW
Make your own clamps design file →
LED & Acrylic set (12 sets) → https://amzn.to/3rXqXYb
LED base (set of 6) → https://amzn.to/35wSJ6j
LED base (set of 4 w/ acrylic) → https://amzn.to/3IKINo8
1/4" Acrylic sheets (set of 3) → https://amzn.to/3rXqRQj
3/16" Acrylic sheet → https://amzn.to/3H9bYAR
1/8" Acrylic sheets 12x16 (set of 2) → https://amzn.to/3AFH5RS
-------------------------------------------------
RECOMMENDED VIDEOS DISCUSSED
Make your own clamps video → • How To Make Clamps For Your CNC Route...
House number sign project → • An Easy CNC Router Project You Can Ma...
How to find exact XYZ position → • Precise Zero Setting Without a Touch ...
---------------------------------------------
BITS LINKS, FEEDS & SPEEDS FOR 0-FLUTE AND ENGRAVER
1/4"-1/8" reducing collet → https://bit.ly/3IGljAs
1/8"0-flute bit
Get it here → https://bit.ly/3syfTCA
Pass depth (depth per cut): 0.125
Feed: 60-80ipm
Plunge: 40ipm
Stepover: 40%
DIAMOND ENGRAVING BIT (Widget Works)
With 120° tip (with 1/4" shank) → https://bit.ly/3tRy98s
With 120° tip (with 1/2" shank) → https://bit.ly/3qq5KUR
90° replacement tip → https://bit.ly/3bp0omD
Pass depth (depth per cut): 0.1
Feed (acrylic): 40ipm
Plunge: 40ipm
Stepover: 40% (does not matter with this bit)
→ Set as engraving bit for machines with spindles
→ For glass, steel, granite and other hard materials, contact Widget Works
→ Do not turn router on for this bit
#cnc #cncrouters #cncforbeginners #vcarvetutorials #vectric #cncrouterbits
------------------------------------------------------
Please support IDC Woodcraft Youtube channel:
Buy me a cup of coffee: https://www.buymeacoffee.com/garrettf...
____________________________________
ROUTER BITS FOR CNC ROUTERS
→ 8-pc carbide CNC router bit set (w/ free vector files) https://bit.ly/3d1iQnF
→ 1” Surfacing bit required for surfacing your spoil board: https://bit.ly/2QEYLKz
***Use this discount code (SURFACING BIT)
→ Glass engraving drag bit: https://bit.ly/3tRy98s
OTHER ‘MUST HAVES’ FOR CNC ROUTERS
→ Calipers: https://amzn.to/338MAt3
→ Hearing protection (plugs don't work): https://amzn.to/2Hs1RgW
___________________________
Unique PNG's and SVG's and other designs for you to create
Vexels → https://www.vexels.com/?ref=idcwoodcraft
_____________________________
MAKING MONEY WITH A CNC
Words are the top-selling items of all time with CNC products. Get the free WORDS THAT SELL list: https://idcwoodcraft.com/cnc-lp-1/
Join CNC ENTREPRENEURS Facebook group: / cncentrepreneurs
------------------------------------------------------
NEW TO CNC OR STUCK IN A PROJECT?
Schedule one-on-one time with me: https://idcwoodcraft.com/for-beginners/
------------------------------------------------------
PLAYLISTS
CNC FOR BEGINNERS: https://bit.ly/3rg4WTl
CNC ENTREPRENEURS: https://bit.ly/3mxz6Ok
VECTRIC VCARVE & ASPIRE TUTORIALS FOR BEGINNERS: https://bit.ly/3pdmFsi
------------------------------------------------------
If you currently own a CNC router, please take a moment to take this survey to share your experience with it: https://bit.ly/3r5XzNh
------------------------------------------------------
CNC FOR BEGINNERS PODCAST: https://anchor.fm/cnc-for-beginners
------------------------------------------------------
Garrett Fromme
Email: [email protected]
Watch video How To Know When To Change The Bit During A Project, CNC Router online without registration, duration hours minute second in high quality. This video was added by user IDC Woodcraft 27 January 2022, don't forget to share it with your friends and acquaintances, it has been viewed on our site 28,904 once and liked it 1.1 thousand people.