High "Q" 'Tuned' Large Ferrite Rods VLF Transmit Antenna for PULSE DENSiTY MODULATiON CW MODE keying
FERRiTE ANTENNA = TEN 7 inch Ferrite rods stacked together to fill the inside of a 2 inch diam. AiRDUX AiR WOUND COiL
https://airdux.com/
coil is parallel resonated by a 1.1uF CAP/coil taps, for max signal output on the VLF band at 8Khz
NOTE: using this T/R device, this setup can be modified easily
to perform full QRQ QSK operations
https://www.qrpkits.com/eztrswitch.html
FOR PORTABLE OPERATIONs: using PDM-CW MODE, saves battery power, since for each CW ELEMENT, the RF AMP is only operating 1 tenth of the time compared to full duration CW ELEMENTs
PULSE DENSITY TICK STREAM by Gstreamer script:
gst-launch-1.0 -v audiotestsrc wave=ticks tick-interval=10000000 sine-periods-per-tick=8 freq=8075 volume=.99 ! audio/x-raw, channels=1, rate=48000 ! audioconvert ! jackkaudiosink
SOUND CARD SDR MODULES used in this demo are from RECRI KEYER:
https://github.com/recri/keyer
SOME ADDITIONAL ViDEO DEMOs of PULSE DENSITY MODULATED CW examples:
• Pulse Density Modulation battery powe...
• Pulse Density Modulated HF CW Transmi...
• Pulse Density Modulated ULF CW Transm...
Watch video High "Q" 'Tuned' Large Ferrite Rods VLF Transmit Antenna for PULSE DENSiTY MODULATiON CW MODE keying online without registration, duration hours minute second in high quality. This video was added by user QRQcw 27 April 2023, don't forget to share it with your friends and acquaintances, it has been viewed on our site 122 once and liked it 1 people.