Asad (I&C Engineer)

Flange standards (MOST SIMPLE GUIDE) | ASME B16.5 | ASME B16.47 | ASME B16.34 | ASME B16.36

What is CAVITATION, FLASHING and CHOCKED FLOW in Control Valve (MOST SIMPLE EXPLANATION)

What is CV in Control Valve | MOST Simple Explanation

Control Valve Characteristics Selection | MOST SIMPLE EXPLANATION

Control Valve's TOP 3 MOST asked INTERVIEW Question and Answers

Difference between BALANCED and UNBALANCED trim CONTROL VALVE

What is Choked flow in Control Valve | Most Simple Explanation

What is CAVITATION INDEX for Control Valve (ISA RP 75.23) | Flashing & Cavitation in control valve

Orifice BETA RATIO limit | Why does it EXISTS !!

Exia vs Exib vs Exic Intrinsic Safety Types

2 Valve | 3 Valve | 5 Valve Manifold explained under 2 MINS

What is difference between Full Bore Valve and Reduced Bore Valve & When to use what ?

Cracking the Interview : On-Off Valve | Top 3 Interview Q&A in 2024

LEVER selection in RELIEF VALVE | What is ASME CODE CASE 2203

ISO 5167 Orifice Straight Run with 3D Model -Explained

Why CV Datasheet has 6 Leakage Class & it does NOT matter much

Relief Valve Selection | MOST Important Criteria | Backpressure Factor

Mastering P&IDs means mastering the entire Chemical Plant

What is Safety Instrumented System | Voting 2oo3 | SIF | PFD Explained

NEVER do this ON OFF Valve MISTAKE

Control Valve Sizing Made Simple | 3 Golden Rules

Types of Strainers | Y Type | Basket Type | Cone Type

What is ASME B16.48 | Figure 8 Blind | Spectacle Blind | Spacers and Blinds

What is solid front pressure gauge as per ASME B40

ULTIMATE GUIDE on Square Root in Transmitter or DCS extraction | Differential Pressure Transmitter

How to AVOID CAVITATION in Control Valves -Part 2

Control Valve Failure Mode (Fail Lock | | Fail last DC | Fail Last DO | FC | FO Modes included)

How to DE-CODE line Number in P&ID | Piping & Instrumentation Diagram

PMI (Positive Material Identification) Versus Material Test report (CMTR) | When to use What ?

How Valve Positioner Works | Hook's Law